Dehka Trade İnternetional Machinery

English

Pump Elements

E-mail Print PDF

PUMP ELEMENTS

The pump elements are mounted on ALLFETT pump body with the necessary number to obtain the system requirement and to let the lub points receive the right quantity and pressure of grease.

ALL-1 PUMP ELEMENT
ALL-1 POMPA ELEMANI
 ALL-1 POMPA ELEMANI
ALL-1 POMPA ELEMANI
10 00 06 01
10 00 06 02
10 00 06 03
GENERAL SPECIFICATIONS
Working Pressure
:
 400 bar.
Pump Element Capacity
:
 2.5 - 3 cm3 / minute
Transfer Tubes
:
 Ø6-Ø8-Ø10-Ø12mm steel
Test Pressure
:
 1000 bar
  • It can be mounted on ALL-1 Pump body. A flow of 2.5-3cm3/min. and a pressure of 600 bars can be obtained from each pump element.
  • An adjustment between 0.5 - 3cm3 can be done with the pump elements.
  • The pressure can be adjusted through the security valve thus the tubes and the pump are protected from high pressure. Additionally pressure security switch contains a check-valve which enables a proper function of the pump element in case of back pressure.
  • A pressure switch can be mounted on the pump element for pressure adjustment. This enables to obtain a warning signal while over pressure.
PRODUCT NR
DESCRIPTION
10 00 06 01
With security valve,Check-valve and capacity adjustment
10 00 06 02
With security valve,Check-valve
10 00 06 03
With security valve,Check-valve and pressure switch
 

 

ALL-2 PUMP ELEMENT

ALL-2 POMPA ELEMANI
10 02 06 02
GENERAL SPECIFICATIONS
Working Pressure
:
 210 bar.
Pump Element Capacity
:
 2.5 - 3 cm3 / minute
Transfer Tubes
:
 Ø6-Ø8-Ø10-Ø12mm steel
Test Pressure
:
 1000 bar
  • It can be mounted on ALL-2 Pump body. A flow of 2.5-3cm3/min. and a pressure of 600 bars can be obtained from each pump element.
  • An adjustment between 0.5 - 3cm3 can be done with the pump elements.
  • The pressure can be adjusted through the security valve thus the tubes and the pump are protected from high pressure. Additionally pressure security switch contains a check-valve which enables a proper function of the pump element in case of back pressure.
  • A pressure switch can be mounted on the pump element for pressure adjustment. This enables to obtain a warning signal while over pressure.
PRODUCT NR
DESCRIPTION
10 02 06 02
With security valve,Check-valve and pressure switch
10 02 06 03
With security valve,Check-valve
 

 

ALL-300 PUMP ELEMENT

ALL-300 POMPA ELEMANI
 
GENERAL SPECIFICATIONS
Working Pressure
:
 400 bar.
Pump Element Capacity
:
 8 - 10 cm3 / minute
Transfer Tubes
:
 Ø6-Ø8-Ø10-Ø12mm steel
Test Pressure
:
 1000 bar
  • It can be mounted on ALL-300 Pump body. A flow of 2.5-3cm3/min. and a pressure of 600 bars can be obtained from each pump element.
  • An adjustment between 0.5 - 3cm3 can be done with the pump elements.
  • The pressure can be adjusted through the security valve thus the tubes and the pump are protected from high pressure. Additionally pressure security switch contains a check-valve which enables a proper function of the pump element in case of back pressure.
  • A pressure switch can be mounted on the pump element for pressure adjustment. This enables to obtain a warning signal while over pressure.
PRODUCT NR
DESCRIPTION
10 00 30 01
With security valve,Check-valve
10 00 30 02
With security valve,Check-valve and pressure switch